Eibach Shop
Clients about us

Eibach Pro Spacers 35/70mm: Ford USA 5x114,3mm

Ask for price188,19€ tax incl.
153,00€ tax excl.

Why do I have to pay tax?

Manufacturer:
Eibach
Product code:
S90-4-35-005
EAN:
4050278020831
Availability:
Dispatch within 2-3 working days
Thickness:
35mm
Track widening per axle:
70mm
Number of Holes:
5
Bolt Hole Circle Ø:
114,3mm
Centering Diameter:
70,5mm
Pieces in set:
2 spacers
Colour:
Silver
Fitting Position:

Qty.:


Product description

Set of Pro-Spacer for front axle only 35/70mm suitable into:

  • Ford USA Mustang Convertible, Mustang Coupe

IMPORTANT

  • Not permitted for vehicles with steel wheels!
  • When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is necessary to use the delivered studs in exchange to the original studs!

Global informations

You have to consider the requirements of the Components Certificate. Components Certificate-requirements are available at www.eibach.com

Our wheelspacers are produced in consideration of the original wheels. When using acessory- or specialwheels, you have to check, if these wheels comply with the necessary requirements. Expecially on cars with studs/nuts. Further we point out, that the larger the wheelsize is, the sensitively reacts the steering in relation to vibrations. (Often caused by badly balanced wheels.) In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.

§ 21-acceptance - In Germany and other European states it is necessary to approve wheelspacers by a Components Certificate-organisation. If this is necessary in your country, please contact your nearest test center to get more information about requirements and costs.

Wheelspacers always should be mounted by hand. - Don´t use electric or pneumatic tools as this could cause vibrations because of misfit on the wheelhub.

From March 2011 the use of steel wheels in combination with Pro-Spacer-wheelspacers is prohibited if not especially allowed by the Components Certificate.

Existing center- and assembling-aids at the wheel hub have to be removed. (e.g. fixing bolts, clamps or rings of the brake disk or -drum)

Additional information

Any questions about this product?
Call us: (+48) 56 652 12 12 or send us email.


Ask for details

Name and surname:

E-mail:

Phone number:

Your question:

Enter code from the picture:

weryfikator