Eibach Shop
Clients about us

Eibach Pro Spacers 5/10mm: Honda 4x114,3mm

Ask for price0,00€ tax incl.
0,00€ tax excl.

Why do I have to pay tax?

Product code:
Contact us for more details
Track widening per axle:
Number of Holes:
Bolt Hole Circle Ø:
Centering Diameter:
Pieces in set:
2 spacers


Product description

Set of Pro-Spacer for front or rear axle 5/10mm suitable into:

  • Honda Accord VI (CK, CG, CH, CF8), Accord VI Coupe (CG), Civic VI Aerodeck (MB, MC), Prelude IV (BB_), Prelude V (BB_)


  • The original stud bolts must be changed. Longer stud bolts are enclosed in the kit. At some cars (e.g. Ford, Kia, Volvo) it´s necessary to disassemble the wheeltrunk and/or the wheel bearing. This only should be done by your garage.

Global informations

You have to consider the requirements of the Components Certificate. Components Certificate-requirements are available at www.eibach.com

Our wheelspacers are produced in consideration of the original wheels. When using acessory- or specialwheels, you have to check, if these wheels comply with the necessary requirements. Expecially on cars with studs/nuts. Further we point out, that the larger the wheelsize is, the sensitively reacts the steering in relation to vibrations. (Often caused by badly balanced wheels.) In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.

§ 21-acceptance - In Germany and other European states it is necessary to approve wheelspacers by a Components Certificate-organisation. If this is necessary in your country, please contact your nearest test center to get more information about requirements and costs.

Wheelspacers always should be mounted by hand. - Don´t use electric or pneumatic tools as this could cause vibrations because of misfit on the wheelhub.

From March 2011 the use of steel wheels in combination with Pro-Spacer-wheelspacers is prohibited if not especially allowed by the Components Certificate.

Existing center- and assembling-aids at the wheel hub have to be removed. (e.g. fixing bolts, clamps or rings of the brake disk or -drum)

Additional information

Any questions about this product?
Call us: (+48) 56 652 12 12 or send us email.

Ask for details

Name and surname:


Phone number:

Your question:

Enter code from the picture: